AQUA-4LIVE units and solutions   

• The Aqua-4live units have been developed to automatically produce activated solutions of different types and strength and to act as a stand alone unit or for use in a continuous process in a more complex systems. Design facility for customised units is available.
• a self cleaning cycle has been programmed into all machines which ensures easy maintenance, maximum productivity and long lifetime.

  
Aqua-4live^®S

• The unique design of the central cell ensures that electrolyte used to produce activated solutions has maximum contact with the electrodes and therefore ensures the most effective use of energy and minimum waste of raw materials
• There is a minimal hydraulic resistance against liquids flowing through the cell chambers which guarantees that optimum flow rate is achieved.

• The electrodes are specifically designed to endure high electrochemical loading as are the membranes which separate the solutions.
• The control system is simple and easy to operate. It can be altered to suit differing applications and conditions.

• A flow meter is installed on the front panel to indicate and control flow through the reactor.
• Brine feed venturies and pinch valves are introduced to ensure accurate dosage under all conditions at any time.

• The enclosure is made of non-corrosive materials. Tubes and connectors are of EPDM/PVDF plastics and are highly resistant against aggressive solutions.
• all input and output connectors are located either at the rear or at one side of the unit to enable easy installation.

Aqua-4live^®M

• a simple on/off switch with power indicator starts and stops the unit manually.
• Level-switches enable to start and stop the unit automatically.
• Self cleaning and independent decalcification process

• Easy and safe to use
• Efficient: 1-5 minutes sterilisation contact time
• Self cleaning
• Cost effective

WDS

Typical drawing of Aqua-4live

• Fully automated
• Fixed strength solutions
• Simple installation and maintenance
• Environmentally and ecologically friendly
• No moveable or replaceable parts

• The Aqua-4live units electrolyze salt (brine solution) and water using polymer or ceramic membranes to separate the positive and negative iones. as a result of the chemical reactions two types of activated solutions are produced: Anolyte -strong and fast-acting disinfectant which kills all known bacteria and viruses within minutes and Catholyte - an alkaline solution which removes heavy metals from water through precipitation or serves as an excellent washing liquid.

• The Aqua-4live units are built in different sizes to address different applications. The units can be used either where only small volumes of disinfectants are required for domestic treatment or for large municipal water systems. The strength of the solutions can be also varied by changing the electrical input into the Aqua-4live units.